welcome iCShop!     服務時間:週一 ~ 週五 9:00~12:00 / 13:00~17:00
TB6612FNG 雙馬達驅動模組
TB6612FNG 雙馬達驅動模組
TB6612FNG 雙馬達驅動模組
TB6612FNG 雙馬達驅動模組
TB6612FNG 雙馬達驅動模組
TB6612FNG 雙馬達驅動模組

TB6612FNG 雙馬達驅動模組

NT$ 210


產品貨號

368030602158

品牌

原廠貨號


數量

  庫存量:4

運送方式

7-11取貨付款 郵寄(單一運費) 宅配 宅配貨到付款 外島郵寄 順豐快遞 順豐快遞貨到付款

商品簡介

TB6612的的用法:
TB6612是雙驅動,也就是可以驅動兩個電機

下面分別是控制兩個電機的IO口
STBY口接單片機的IO口清零電機全部停止,置1通過AIN1 AIN2,BIN1,BIN2 來控制正反轉
VM  接12V以內電源
VCC 接5V電源
GND 接電源負極
驅動1路
PWMA      接單片機的PWM口  

真值表:
AIN1 0      0      1
AIN2 0      1      0
     停止 正傳   反轉
A01  
AO2   接電機1的兩個腳
驅動2路
PWMB     接單片機的PWM口

真值表:
BIN1 0      0      1
BIN2 0      1      0
     停止 正傳   反轉
B01

BO2   接電機2的兩個腳

Description: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU.

Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.

Features:

  • Power supply voltage: VM=15V max, VCC=2.7-5.5V
  • Output current: Iout=1.2A(average) / 3.2A (peak) 
  • Standby control to save power
  • CW/CCW/short brake/stop motor control modes
  • Built-in thermal shutdown circuit and low voltage detecting circuit
  • All pins of the TB6612FNG broken out to 0.1" spaced pins
  • Filtering capacitors on both supply lines
出貨清單
  • TB6612FNG 雙馬達驅動模組 x 1