welcome iCShop!     服務時間:週一 ~ 週五 9:00~12:00 / 13:00~17:00
PCF8574 IO Expansion Board

停售

PCF8574 IO Expansion Board

停售

PCF8574 IO Expansion Board

停售

PCF8574 IO Expansion Board
PCF8574 IO Expansion Board
PCF8574 IO Expansion Board

PCF8574 IO Expansion Board

NT$ 此商品已停售


產品貨號

3680305001406

品牌

原廠貨號

SKU:3708

數量


運送方式

7-11取貨付款 郵寄(單一運費) 宅配 宅配貨到付款 外島郵寄 順豐快遞 順豐快遞貨到付款

商品簡介

基於I2C介面的I/O擴展模組,使用2個I/O可擴展8個I/O(最多可同時使用8個PCF8574,擴至64個I/O)

最大特點:

  • 1. 支援兩種介面類型接入目標板:排針或排座
  • 2. 支援I2C匯流排級聯(通過排針、排座對接的方法,可同時使用多個I2C模組)

商品應用:

對I/O資源緊缺的MCU進行I/O擴展

主要資源:

PCF8574,I2C介面,8位元並口

資料包括:

  • 測試程式(AVR、STM8、C8051F)
  • 電路原理圖
  • 相關PDF資料

商品規格





如何查詢I2C位址

操作流程

STEP 1. 將欲查詢的模組連接至Arduino UNO(附圖為腳位參考,實際請比對商品標示接線)

STEP 2. 開啟Arduino IDE並新增檔案

STEP 3. 貼入教學下方的範例文件,並上傳到Arduino UNO,即會開始掃描I2C位址

STEP 4. 開啟序列埠監控視窗,即可取得I2C位址

I2C掃描範例程式

/ ---------------------------------------------------------------- /
// Arduino I2C Scanner
// Re-writed by Arbi Abdul Jabbaar
// Using Arduino IDE 1.8.7
// Using GY-87 module for the target
// Tested on 10 September 2019
// This sketch tests the standard 7-bit addresses
// Devices with higher bit address might not be seen properly.
/ ---------------------------------------------------------------- /
#include //include Wire.h library
void setup()
{
Wire.begin(); // Wire communication begin
Serial.begin(9600); // The baudrate of Serial monitor is set in 9600
while (!Serial); // Waiting for Serial Monitor
Serial.println("\nI2C Scanner");
}
void loop()
{
byte error, address; //variable for error and I2C address
int nDevices;
Serial.println("Scanning...");
nDevices = 0;
for (address = 1; address < 127; address++ )
{
// The i2c_scanner uses the return value of
// the Write.endTransmisstion to see if
// a device did acknowledge to the address.
Wire.beginTransmission(address);
error = Wire.endTransmission();
if (error == 0)
{
Serial.print("I2C device found at address 0x");
if (address < 16)
Serial.print("0");
Serial.print(address, HEX);
Serial.println(" !");
nDevices++;
}
else if (error == 4)
{
Serial.print("Unknown error at address 0x");
if (address < 16)
Serial.print("0");
Serial.println(address, HEX);
}
}
if (nDevices == 0)
Serial.println("No I2C devices found\n");
else
Serial.println("done\n");
delay(5000); // wait 5 seconds for the next I2C scan
}
出貨清單
  • PCF8574 IO Expansion Board x 1